Toyota Celica 1993 AT200 series Repair Manual page 494

sA-l39
susPENsroN AND AXLE - REAR AXLE HUB AND qAESIIE
(c) Temporarily connect th€ strut rod to the roar axl€
carrier with th6 bolt and nut.
(d) Torque the 2 shock absorber s€t nuts.
Torque: 255 t{.m (2,600 kgf cm, 188 ft lbt)
2. w/ ABS:
CONNECT ABS SPEED SENSOR
Connect tho ABS speed sensor to the rear axle carrier.
Torque:8.0 N.m (82 kgf'cm,71 in"lbf)
3.
INSTALL BACKING PLATE AND REAR AXLE HUB
(a) Placa the backing plate,
(b) lnstall a new O-ring.
HINT: Coat the O-ring with MP grease.
(c) Install tho rear axle hub with the 4 bolts.
Torque: 80 N.m (820 kgf 'cm, 59 ft'lbf )