Toyota Celica 1993 AT200 series Repair Manual page 232

MX-41
E56 MANUAL TRANSAXLE - OUTPUT SHAFT
2 .
C H E C K 1 S T A N D 2 N D G E A R R A D I A L C L E A R A N C E
U s i n g a d i a l i n d i c a t o r , m e a s u r e t h e r a d i a l c l e a r a n c e
betwsen the goar and shaft.
Standard cleatance:
1st gear
0.009 - 0.051 mm (0.0004 - 0.0020 in.)
2nd gaar
0.009 - 0.053 mm (0.0004 - 0.0021 in')
Maximum clsaranco:
1st and 2nd gear
0.070 mm (0.0028 in.)
lf the clearance exceeds tho limit, raplace ths goat' e,,*-^*
needle roller bearing or shaft.
t:] ttlx
3.
REMOVE OUTPUT SHAFT REAR BEARING, 4 TH
DRIVEN GEAR AND SPACER
(a) Using a press, remov€ the bearing and 4th driven gsar.
(b) Remove the spacer.
4.
REMOVE 3RD DRIVEN GEAR AND 2ND GEAR
Using a press, r€move the 3rd driven gear and 2nd
g€ar.
5.
REMOVE NEEDLE ROLLER BEARING, SPACER AND
S Y N C H R O N I Z E R
B I N G S
6.
REMOVE SNAP RING
Using a snap ring expander, romove the snap ring.