Toyota Celica 1993 AT200 series Repair Manual page 478

s A - 1 2 3
SUSPENSION AND AXLE - FRONT SUSPENSIO
N (Mac Pherson Strut T
\>'
':-"'=
4,
CONNECT LOWER ARM TO LOWER BALL JOINT
Tighten the bolt and 2 nuts.
T o r q u e : 1 2 7 N . m ( 1 , 3 0 0 k g f . c m , 9 4 f t ' l b f )
5 .
C O N N E C T S T A B I L I Z E R B A R L I N K T O L O W E R A R M
Torque:44 N.m (450 kgf.cm,33 ft.lbf)
6 . C O N N E C T T I E R O D E N D T O S T E E R I N G K N U C K L E
(a) Tig hten th6 nut.
Torque: 49 N.m (500 kgf.cm,36 ft.lbf)
(b) Install a new cottar pin.
HINT: lf the cottsr pin hole does not line up, correct
by tightening the nut by the smallsst amount possible.
7,
INSTALL DRIVE SHAFT LOCK NUT
(a) Install and torque tho lock nut.
Torque: 216 N.m (2,200 kgf .cm, 1 59 ft lbt)
( b ) I n s t a l l t h e l o c k c a p a n d s e c u r a i t w i t h a n e w c o t t e r p i n .
8 .
I N S T A L L E N G I N E U N D E R C O V E R S
9 . S T A B I L I Z E S U S P E N S I O N
( a ) I n s t a l l t h a f r o n t w h e e l a n d l o w e r v e h i c l e .
Torque: 103 N.m (1,050 kgf.cm, 76 ft.lbf)
( b ) B o u n c e t h e v e h i c l a u p a n d d o w n s e v e r a l t i m a s t o
stabilize the suspe ns ion
r.5;
--ZR*
tffil
M