s A - 1 4 0
SUSPENSION AND AXLE - REAR AXLE HUB AND CARRIER
4.
INSTALL BRAKE DISC AT'ID CALIPER
(a) Install ths disc.
(b) Install the brake caliper with the 2 bolts.
Torque:47 N.m (475 kgf.cm,34 fr.lbf)
5.
STABILIZESUSPENSION
(a) Install the rear wheel and lower the vehicle.
Torque: 103 N.m (1,050 kgf.cm, 76 ft.lbf)
(b) Bounce the vehicle up and down soveral times to
stabilize the suspension.
6.
TOROUE BOLTS AND NUT
(a) Jack up vehicle and support body with stands.
(b) Remove the rear wheel.
(c) Support th6 rear axle carrier with a jack.
(d) Torque the bolts and nuts.
Torque:
Strut rod: I 13 N'm (1 ,150 kgf.cm, 83 ft.lbf)
Lower arm: 197 N.m (2,010 kgf.cm, 145 ft.lbt)
7.
INSTALL REAR WHEEL AND LOWER VEHICLE
Torque: 103 N.m (1,050 kgf .cm, 76 ft.lbf)
8.
INSPECT AND ADJUST REAR WHEEL ALIGNMENT
(See page SA-9)