Toyota Celica 1993 AT200 series Repair Manual page 674

sR-55
STEERING _ POWER STEERING
4.
INSTALL NEW LONGER STRAIGHT PIN
5.
INSTALL VANE PUMP SHAFT WITH VANE PUMP
ROTOR AND SIDE FRONT PLATE
Align the hole of the plate and longer straight pin, and
tao in the shaft with a plastic hammer.
N O T I C E : B e c a r e f u l n o t t o d a m a g o t h o o i l . e e l a n d O -
nnga,
6 .
I N S T A L L C A M R I N G
Align the hol6s of th€ cam ring and 2 straight pins, and
install the ring with the inscribed mark facing out'
ward.
7,
INSTALL 1O VANE PLATES
l n s t a l l t h E o l a t e w i t h t h o r o u n d e n d f a c i n g o u t w a r d .
8,
INSTALL SIDE REAR PLATE
(a) Coat a new O - ring with powsr st€ering fluid.
(b) Install the O-ring to the plate.
(c) Align th€ holes of the plate and 2 straight pins, and
install the Dlat6.
lnscribod MErk
R o u n d
E n d