Toyota Celica 1993 AT200 series Repair Manual page 180

S54 MANUAL TRANSAXLE - COMPONENT PARTS INSTALLATION
MX.63
-,:;-.r]1---1i
( c ) A p p l y s e a l a n t t o t h e p l u g t h r a a d s .
Sea la nt:
Part No.08833-00080, THBEE BOND 1344, LOC'
f lTE 242 or equivslent
(d) Using a hexagon wrench, install the straight scrow
p l u g .
Torque: 13 N.m (130 kgf cm, I ft lbf)
s M o 1 2 8
s M 0 2 t 9
7. TNSTALL REVERSE
SHIFT ARM
ffi
(a) Put the reverse shift fork pivot into th€ rsvorse shift wt
arm and install the reverse shift arm to th€ transaxle
cas6.
(b) Shift the reverse shift arm into the rev6rso.
(c) Install and torque the 2 bolts.
Torqua: 18 N.m (1 85 kgf cm, 13 ft'lbf)
(d) Shift the rev€rse shift arm to the nautral position.
8.
INSTALL REVERSE IDLER GEAR AND SHAFT
( a ) I n s t a l l t h e w a s h e r a n d r e v e r s e i d l e r g e a r t o t h e s h a f t .
(b) Inslall tho reverse idler gear and shaft as shown.
9 .
I N S T A L L T R A N S M I S S I O N C A S E
(a) Remove any FIPG material and be caraful not to drop
oil on the contacting surface of the transaxle caso or
t r a n s m r s s r o n c a s 6 .
(b) Apply FIPG to the transmission cas€ as shown.
F I P G :
Part No.08833-00090. THREE BOND 1281 or equi-
valent
o,---t\
)
/ F/-,
\ -/ "fv