Toyota Celica 1993 AT200 series Repair Manual page 911

BO-30
B O D Y _ W I N D S H I E L D M O U L D I N G
B O
W I N D S H I E L D M O U L D I N G R E M O V A L
1 . R E M O V E F O L L O W I N G P A R T S :
(a) Wiper arm
(b) Cowl top ventilator louver
2 .
R E M O V E W I N D S H I E L D M O U L D I N G
(a) Using a knife, cut off the moulding as shown.
(b) Cut away the adhesive at the moulding installation
area as much as possible.
NOTICE; Do not damage the body with the knife.
W I N D S H I E L D M O U L D I N G I N S T A L L A T I O N
1 .
C U T A D H E S I V E A T M O U L D I N G I N S T A L L A T I O N
AREA
Using the knife, cut off the adhesive around tho mou-
lding in stallation area.
2. APPLY ADHESIVE AT MOULDING INSTALLATION
A R E A
3,
INSTALL WINDSHIELD MOULDING
Place lhe mouldrng onto tha body and tap it by hand.
4.
INSTALL FOLLOWING PARTS:
(a) Cowl top ventilator louver
(b) Wiper arm
Torque: 21 t{.m (205 kgf 'cm, 15 tt.lbf)