Toyota Celica 1993 AT200 series Repair Manual page 1011

AC-56
AIR CONDITIONING SYSTEM - COMPRESSOR
(b) Using SST and torque wrench, install the shaft bolt.
s s T 0 7 1 1 2 - 7 6 0 6 0
T o r q u e : 1 4 N . m ( 1 4 0 k g f . c m , 1 0 f t . l b f )
4. CHECK CLEARANCE OF MAGNETIC CLUTCH
(a) set tho dial indicator to the pressure plate of the
magnetic clutch.
(b) Connect the magn€tic clutch lead wire to the positive
(+) terminal of th€ battery.
(c) Check the clearance between th€ prossuro plat€ and
rotor, then conn6ct the nogative (-) terminal of the
battery.
Stande?d clssrance:
0.5 + 0.15 mm (0.020 + 0.0059 in.)
lf the clearance is not within standard clearance,
adjust the clearance using shims to obtain the stand-
ard clearance.
Shim thickncar:
0.1 mm (0.004 in.)
0.3 mm (0.012 in.)
0.5 mm (0.020 in.)