Toyota Celica 1993 AT200 series Repair Manual page 916

BO-35
B O D Y _ W I N D S H I E L D
( b ) T h o r o u g h l y m i x 5 0 0 g ( 1 7 . 6 4 o z . ) o f t h e m a i n a g e n t
and 75 g (2.65 oz.) of ths hardening agent on a glass
plate or like object with a putty spatula.
1 1 . A P P L Y A D H E S I V E
(a) Cut off tho tip of the cartridge nozzle. Fill the cartridge
with adhesive.
(b) Load the cartridge into the sealer gun.
(c) Coat the glass with adhesive as shown.
H: 12 mm (0.47 in.)
1 2 . I N S T A L L G L A S S
(a) Position tho glass so that the referonce marks are
l i n e d u p , a n d p r e s s i n g e n t l y a l o n g t h e r i m .
(b) Using a spatula, apply adhesive on ths glass rim
HINT: Confirm that tho dam is attached to the body
panel as shown in th6 illustration.
(c) Use a scraper to ramove any excess or protruding
adhesive.
(d) Fasten glass securely until the adhosive sots.
,&z@
.Y
..Y
T-A
\na
: t
-tiii?7i