Toyota Celica 1993 AT200 series Repair Manual page 398

suspe
7.
DISCONNECT LOWER BALL JOINT ATTACHMENT
Remove tho nut and 2 bolts and disconnect ths lower
ball joint attachment from steering knuckle'
8.
DISCONNECT CAMBER CONTROL ARM
(a) Remove th€ cotter pin and lock cap, remove tha nut'
(b) Using SST, disconnect the camber control arm from
shock absorber.
s s T 0 9 6 2 8 - 6 2 0 1 1
9,
DISCONNECT DRIVE SHAFT
Using a plastic hammer, disconnect the drive shaft
f rom axle hub.
NOTICE: Cover the drive shatt boot vYith cloth to prolect
i t f r o m d a m a g e .
1 0 . R E M O V E L H D R I V E S H A F T
( a ) U s i n g h u b n u t w r o n c h a n d h a m m e r h a n d l e o r a n
eouivalent, pull out the drive shaft, as shown'
*i#,5