Toyota Celica 1993 AT200 series Repair Manual page 703

sR-84
S T E E R I N G _ P O W E R S T E E R I N G
S c r e w d r i v e r
6. REMOVE RACK ENDS AND CLAW WASHERS
(a) Secure the rack end in a vise.
NOTICE: Do not tighten the vise too tight.
(b) Using a screwdriver and hammer, unstake the washer.
N O T I C E : A v o i d a n y i m p a c t t o t h s s t e s r i n g r a c k .
(c) Using a spanner 122 mml to hold the steering rack
sleady, and using SST, remove the rack end.
s s r 0 9 9 2 2 - 1 0 0 1 0
N O T I C E : U s e S S T 0 9 9 2 2 - 1 0 0 1 0 i n t h e d i r e c t i o n s h o w n
i n t h e i l l u s t r a t i o n .
( d ) M a r k t h e r i g h t a n d l e f t r a c k e n d s a c c o r d i n g l y .
7 . R E M O V E R A C K G U I D E S P R I N G C A P L O C K N U T
Using SST, rsmove the nut.
s s T 0 9 9 2 2 - l 0 0 1 0
N O T I C E : U s e S S T 0 9 9 2 2 - 1 0 0 1 0 i n t h e d i r e c t i o n s h o w n
i n t h e i l l u s t r a t i o n .
8 . R E M O V E R A C K G U I D E S P R I N G C A P , R A C K G U I O E
S P R I N G A N D R A C K G U I D E
Using a hexagon wrench (24 mml, remove the cap.
R a c k G u i d e S p r i n g
C a p L o c k N u t