Toyota Celica 1993 AT200 series Repair Manual page 136

S 5 4 M A N U A L T R A N S A X L E _ A S S E M B L Y R E M O V A L A N D I N S T A L L A T I O N
M X . 1 9
3 5 - G E E n g i n e :
(a) Install the 2 tube clamps and torque the 2 bolts.
(b) Install the release cylinder and torque ths 2 bolts
Torque: 12 N.m (120 kgf'cm, I ft'lbf)
(c) lnstall the heat insulator and torque tho 2 bolts
Torqua: 12 N'm (120 kgf cm, g ft lbf)
19. INSTALL STARTER
(a) Install the starlar and torque the 2 bolts.
T o r q u e : 3 9 N . m ( 4 0 0 k g f c m , 2 9 f t ' l b f )
( b ) C o n n e c t t h s c o n n o c t o r a n d w i r e t o t h s s t a r t s r .
20. w/ CRUISE CONTROL:
INSTALL CRUISE CONTROL ACTUATOR
(a) Install the cruise control actuator with bracket and
tora ue tha 3 bolts
(b) Connect tho connector.
2.I . INSTALL AIR CLEANER CASE ASSEMBLY WITH
AIR HOSE AND BATTERY
2 2 . C O N N E C T N E G A T I V E ( - ) T E R M I N A L C A B L E T O
BATTERY
2 3 . I N S P E C T F R O N T W H E E L A L I G N M E N T
(See page SA-7)
24. PERFORM ROAD TEST
Check for abnormal noises and smooth shifting.