Toyota Celica 1993 AT200 series Repair Manual page 186

MX-69
S54 MANUAL TRANSAXLE
_ COMPONENT PARTS INS
l7-;DX1, 'aa-
- l*;
F:-t1 >--
y',l)Nfur
9 -l /:-l-
26, INSTALL SELECTING BELLCRANK AND ENGINE
M O U N T B R A C K E T
(a) Install the selecting bellcrank and 2 bolts'
Torque: 37 N'm (380 kgf 'cm, 27 ft lbf )
(b) Install ths engine mount bracket and torque the 3
bo lts.
Torque: 52 N m (530 kgf'cm. 38 ft lbf)
27. INSTALL RELEASE BEARING RETAINER
MX
lnstall the release bearing retainer and torque the 3
bolts.
Toroue: 7.4 N m (75 kgf cm, 65 in. lbf)
2 8 . I N S T A L L B A C K - U P L I G H T S W I T C H
Torque: 44 N'm (450 kgf cm. 33 ft lbf)
2 9 . I N S T A L L V E H I C L E S P E E D S E N S O R
3 0 . I N S T A L L R E L E A S E F O R K A N D B E A R I N G
( a ) A p p l y m o l y b d e n u m d i s u l p h i d e l i t h i u m b a s e g r e a s e t o
t h s f o l l o w i n g P a r t s :
. Input shaft sPline
o
R e l e a s e f o l k c o n t a c t s u r f a c e
(b) Apply MP grease to the front surface of the release
bea ring.