Toyota Celica 1993 AT200 series Repair Manual page 1040

AIR CONDITTONTNG
SYSTEM _ AIR CONOITIONER
CONTROL ASSEMBLY
4C.85
C o n n e c t o r
" A "
N r 0 t 3
C o n n e c t o r " A "
C o n n e c t o r " A "
C o n n e c t o r " A "
3. INSPECT AIR INLET INDICATOR
LHD Models:
(a) Connect the positivo (*) lead from th6 battory to
terminal A- 19 and the negative (-) lead to terminal
A - 2 2 .
(b) Check that the FRESH and RECIRC indicators light up
alternatoly each time th€ air inlet control switch
button is oressed.
lf operation is not as specified. replace the A/C con-
trol assembly.
RHD Models:
(a) Connect the positive (+) lead from th6 battery to
t e r m i n a l A - 1 8 a n d t h e n e g a t i v e ( - ) l e a d t o t 6 r m i n a l
A - 9 .
(b) Check that th6 FRESH and RECIRC indicators light up
alternately each time the air inlet control switch
button is pressed.
ff operation is not as specified, replace the A/C con-
trol assem blv.
4. INSPECT INDICATOR DIMMIf{G OPERATION
LHD Modelg:
(a) Connect th6 positive (*) lead from the battery to
terminal A- 19 and th6 negativo (-) lead to terminal
A-21 and A-22.
(b) Connect the positive (*) lead from th6 battery to
terminal A - 8 and check that th€ mode indicator
dims.
lf operation is not as specified, replace the A/C con-
trol assemblv.
RHD Models:
(a) Connect the positive (+) lead from the batt€ry to
t6rminal A- 18 and the negative (-) lead to terminal
A - 1 7 a n d A - 9 .
(b) Connect th€ positivo (+) lead from the batt€ry to
torminal A - I 9 and check that the mode indicator
dims.
ff operation is not as specified. replace th6 A/C con-
trol ass€mblv.