Toyota Celica 1993 AT200 series Repair Manual page 710

sR-91
STEERING - POWER STEERING
7.
INSPECT CONTROL VALVE BEARING
Check the bearing rotation condition and check for
abnormal noise.
lf the b€aring is worn or damaged, roplace the control
valve assembly.
8.
INSPECT CYLINDER END STOPPER BUSHING
(a) Check for wear and damage on the inside of the
b u s h i n g ,
lf tha bushing is worn or damaged, replaca the cylin-
der gnd stopper.
(b) Coat inside of the bushing with molybdenum dis-
u l p h i d e l i t h i u m b a s e g r e a s e .
PS GEAR HOUSING ASSEMBLY
1. COAT WITH POWER STEERING FLUID OR MOLYB-
OENUM DISULPHIDE LITHIUM BASE GREASE
(See pases SR-79 to SR-82)
2,
INSTALL OIL SEAL
(a) Coat a new oil seal lip with power steering fluid.
(b) Using SST, press in tho oil seal.
ssr 09631 - 12020, 09631 -20040
ITIOTICE:
r Makc !ur! you Inttlll thr oll rcal faclng thr co?rcct
dlrcctlon.
r
Takc c!rc thlt tho oll tcal doga not got itycrrgd !r
you Inrtall lt.