Toyota Celica 1993 AT200 series Repair Manual page 107

Mx-66
c52 MANUAL TRANsAXLE - coMpoNENT pARTS TNSTALLATToN
(e) lnstall the No.2 shift fork shaft and shift head.
(f)
lnstall and torque the No.1, No.2 and No.3 shift fork's
3 set bolts.
Torque: 16 N.m (1 60 kgf 'cm, 12 ft.lbf)
(g) Using a screwdriver and hammer, tap in the 3 snap
r i n g s .
8. INSTALL TRANSAXLE CASE
(a) Remove any FIPG material and be careful not to drop
oil on th6 contacting surface of the transmission case
and transaxle case.
(b) Apply FIPG to tho transaxle case, as shown in the
illustration.
FIPG:
Part No. 08826-00090, THREE BOND 1281 or equi.
valont
(c) Install and torqu€ the 16 bolts.
T o r q u e : 2 9 N . m ( 3 0 0 k g f . c m , 2 2 f t . l b f )