Toyota Celica 1993 AT200 series Repair Manual page 785

BE-52
BODY ELECTRICAL SYSTEM - WIPER AND WASHER SYSTEM
W I P E R M O T O R I N S P E C T I O N
1 . I N S P E C T F R O N T W I P E R M O T O R
Low Speed Operation:
Connect the positive (+) lead from the battery to
t e r m i n a l 3 a n d t h e n e g a t i v € ( - ) l e a d t o t e r m i n a l 1 ,
check that the motor operates at low speed.
lf operation is not as specified, replacs the motor.
High Speed Operation:
Connect the positive (+) lead from the battery to
t e r m i n a l 2 a n d t h e n e g a t i v e ( - ) l e a d t o t e r m i n a l 1 ,
check that the motor op6rat6s at high spead.
lf operation is not as specified, roplac€ the motor.
Stopping at Stop Position Operotion:
(a) Oporate the motor at low speed and stop the motor
operation anywhere by disconnecting positlve (-r- /
lead f rom terminal 3.
( b ) C o n n e c t t e r m i n a l s 3 a n d 5 .
(c) Connect the positive (+) lead from the battery to
t e r m i n a l 6 a n d n e g a t i v e ( - ) l e a d t o t e r m i n a l 1 , c h e c k
that the motor stops running at the stop position after
the motor op€rates again.
lf operation is not as specified, replace the motor.