Toyota Celica 1993 AT200 series Repair Manual page 566

BRAKE SYSTEM - FRONT BRAKE(3S-GE w/ Super Strut T
C Y L I N D E R I N S T A L L A T I O N
1 . I N S T A L L 2 B R A K E P A D S
l n s t a l l t h e i n s i d e a n d o u t s i d e p a d s .
2 . I N S T A L L C Y L I N D E R
(a) Temporarily install the caliper on ths torqu€ plate with
t h e 2 i n s t a l l a t i o n b o l t s .
(b) Hold the sliding pin and torque the installation bolt'
Torque: 34 N.m (350 kgf.cm,25 ft,lbf)
C O N N E C T F L E X I B L E H O S E
Install the flexible hose on the caliper with 2
g a s kets.
T o r q u e : 3 0 N m ( 3 1 0 k g f . c m , 2 2 f t . l b f )
F|LL BRAKE RESERVOIR
WITH BRAKE FLUID AND
BLEED BRAKE SYSTEM
( S a e p a g e B R - 9 )
C H E C K F O R L E A K S