Toyota Celica 1993 AT200 series Repair Manual page 471

sA'l16
suspENsroN AND AXLE - FRoNT suspENstoN(Macpherson
strut Type)
(c) Position tho dust cover to tho upper spring seat.
(d) Install tho upper spring seat with dust cover to ths
shock absorber.
(e) Align the mark on the upper spring seat to point
outward from the vehicle in its installed ooisition.
(f)
Install the bearing and suspension support.
(S) Using SST to hold the suspension support, install a
now nut.
s s T 0 9 7 2 9 - 2 2 0 3 1
Torque: 47 N.m (480 kgf .cm, 35 fr.lbf )
(h) Remove the SST from thE coil spring.
NOTICE: Chock thrt the boaiing fits into the recoss in the
rusponsion ruppo?t.
4, INSTALL SHOCK ABSORBER WITH COIL SPRING
Place the shock absorber and install th€ 3 nuts.
Torque: 80 N.m (820 kgf .cm, 59 ft.lbf)
mo65J