Toyota Celica 1993 AT200 series Repair Manual page 94

C52 MANUAL TRANSAXLE - SHIFT AND SELECT LEVER SHAF
E3876 CM0060
(b) Using a socket wrench and hammer, drive in a new oil
s e a l .
Driva in dapth:
1 .0 - 2.0 mm (0.039 - 0.079 in.)
(c) Coat the lip of the oil seal wrth MP grease.
S H I F T A N D S E L E C T L E V E R S H A F T
A S S E M B L Y
1. APPLY MP GREASE TO PARTS, AS SHOWN
^rE*@Q
6) ON@
\ J 9
t f \
/11 - l-
aV<1qi.
h)J
-\
r '
I
2.
INSTALL SHIFT AND SELECT LEVER SHAFT
lnstall the boot and shift and select levar shaft to the
control shaft cover.
HINT: Maks surs to install the boot in correct direc-
tion.
Position the air bleed of the boot downward.
3 .
I N S T A L L S N A P R I N G
U s i n g a s c r a w d r i v e r
a n d h a m m e r , t a p i n t h e s n a p r i n g .