Toyota Celica 1993 AT200 series Repair Manual page 611

BR-96
BRAKE SYSTEM _ ANTI_LOCK BRAKE SYSTEM (ABS)
r*En'l
(c) Install the sensor harness with tho 3 bolts.
w/ Supor Strut Type Suspeneion:
(a) lnstall the speed sensor to the st€ering knuckle.
Torque:8.0 N.m (82 kgf.cm.7l in..lbf)
NOTICE: Mlko rure that -
.
There are no foreign objects on the sensor or th6
part of the knuckle to which th6 sensor is to be
installed.
r
The sensor is install€d flat against tho knuckt6
when you thighten the bolt.
(b) Install the 3 bolls to the lower suspension arm.
2,
CONNECT SPEED SENSOR CONNECTOR
3. PREFORM SPEED SENSOR SIGNAL CHECK
(See page BR - 82)