Toyota Celica 1993 AT200 series Repair Manual page 401

sA-46
SUSPENSION AND AXLE - FRONT DRIVE SHAFT(3S-GE}
(c) Using a snap ring expander, r€mov€ the snap ring.
(d) Using a brass bar and hammer, remove the inner race.
O. REMOVE SNAP RING
(a) Using a snap ring expander, rsmove ths snap ring.
7, REMOVE INBOARD JOINT BOOT
8. RH Drive rhaft:
REMOVE DYNAMIC DAMPER
(a) Using a screwdriver, remove the clamp of th€ dynamic
o a m 0 6 r .
( b ) R e m o v e t h e d y n a m i c d a m p e r .
9. REMOVE OUTBOARD JOINT BOOT
(a) Using a screwdriver, remove the 2 bool clamps.
(b) Remove the outboard joint boot toward the inboard
joint.
x 4 6 8 5