Toyota Celica 1993 AT200 series Repair Manual page 688

sR-69
STEERING _ POWER STEERING
,
HINT: Pressure feed No.2 tube installation angle is
3 5 ' .
1 5 . I N S T A L L S U C T I O N P O R T U N I O N
(a) Coat a new O - ring with powor steering f luid.
( b ) I n s t a l l t h e O - r i n g t o t h e u n i o n .
(c) Install the union with the bolt.
Torque: 13 N.m (130 kgf .cm, I tt.lbf )
1 6 . I N S T A L L A I R C O N T R O L V A L V E
( a ) I n s t a l l a n a w u n i o n s e a t .
(b) Tighten the valve.
Torque:36 N.m (370 kgf.cm,27 ft.lbf)
1 7 . I N S T A L L V A N E P U M P P U L L E Y
(a) Install ths woodruff key to the vane pump shaft.
(b) Using SST to stop the pulloy rotating, torque the nut.
ssT 09960 - 1 001 0
T o r q u e : 4 3 N . m ( 4 4 0 k g f ' c m , 3 2 f t ' l b f )
ffi