Toyota Celica 1993 AT200 series Repair Manual page 670

sR-51
STEERING - POWER STEERING
Screwdriver
6.
REMOVE FLOW CONTROL VALVE AND SPRING
7.
REMOVE REAR HOUSING AND WAVE WASHER
(a) Using 2 screwdrivers, remove the snap ring.
(b) Using a plastic hammer, tap out the housing and
washer.
(c) Remove the O-ring from the housing.
8.
REMOVE SIDE REAR PLATE
( a ) U s i n g a p l a s t i c h a m m e r , t a p o u t t h e p l a t e .
( b ) R e m o v e t h e O - r i n g f r o m t h e p l a t € .
9.
REMOVE CAM RING AND 1O VANE PLATES
Remove the ring and plates from tho shaft.
1 0 . R E M O V E V A N E P U M P S H A F T W I T H V A N E P U M P
ROTOR AND SIDE FRONT PLATE
1 1 . R E M O V E L O N G E R S T R A I G H T P I N