Toyota Celica 1993 AT200 series Repair Manual page 556

BRAKE SYSTEM - FRONT BRAKE(sS-FE, 33-GE w/o Super Strut Type)
BR-41
4.
IF NECESSARY, ADJUST DISC RUNOUT
(a) Remove the toruqe plate from tho knuckle'
(b) Remove the 5 hub nuts and tha disc Reinstall the disc
1/5 of a turn round from its original position on the
hub. Install and torque tho 5 hub nuts'
Torque: 103 N m (1,050 kgf cm, 76 ft'lbf)
Remaasure the disc runout. Make a noto of this runout
a n d t h e d i s c ' s P o s i t i o n o n t h e h u b .
(c) Repeat (b) until tho disc has installed on the 3 rsmain-
i n g h u b P o s i t i o n .
(d) lf the minimum runout recorded in (b) and (c) is less
t h a n 0 . 0 5 m m ( 0 . 0 0 2 0 i n . ) , i n s t a l l t h e d i s c i n t h a t
posltlon.
(e) lf the minimum runout recorded in (b) and (c) is greator
than 0.05 mm (0.0020 in.), replace tho disc and repeat
steP 3.
, B R
(f)
lnstall lhe torque plato and torque tho mounting bolts.
Torque: 107 N m (1.090 kgf'cm' 79 tt lbf)