Toyota Celica 1993 AT200 series Repair Manual page 1026

AIR CONDITIONING SYSTEM - AIR OUTLET CONTROL SERVOMOTOR
4C.71
A I R O U T L E T C O N T R O L
SERVOMOTOR
AIR OUTLET SERVOMOTOR REMOVAL.'"
.,
1 . R E M O V E I N S T R U M E N T L O W E R N O . 1 F I N I S H
PANEL
(See page BO - 52)
2.
REMOVE INSTRUMENT PANEL FINISH PANEL
(See page BO - 52)
3. REMOVE HEATER DUCT NO.2
(See pase BO-52)
4, REMOVE SERVOMOTOR
(a) Disconnect the connector.
(b) Remove tho 2 screws and the servomotor.
AIR OUTLET SERVOMOTOR INSPECTION
INSPECT SERVOMOTOR OPERATION
(a) Connect the positive (*) lead from the batt€ry to
terminal 5 and the negative (-) lead to terminal 6.
(b) Connect the negative (-) lead from the battory to
each terminal and check that th€ arm rotates to each
position, as shown below.
lf operation is not as specified, replace the sorvomo-
tor.
Conngct6d tgrminrl
Porition
FACE
s/L
FOOT
4
FOOf / OEF
7
|.lEE