Toyota Celica 1993 AT200 series Repair Manual page 445

sA-90
S U S P E N S I O N
A N D A X L E - F R O N T S U S P E N S I O N
1 0 . D I S C O N N E C T D R I V E S H A F T
(a) Using a plastic hammer. disconnect the drive shaft
f rom the axle hub.
NOTICE: Covor the drivo.haft boot with cloth to protect
it from damago.
(b) Place wooden block on th6 jack and support the lower
ball joint attchment.
i S A
1 1 . R E M O V E S H O C K A B S O R B E R W I T H
K N U C K L E
(a) Remove tho 3 nuts on upper side of the
sorber.
(b) Remove the shock absorber with stoerino
S T E E R I N G
s h o c k a b -
k n u c k l e .
S H O C K A B S O R B E R W I T H S T E E R I N G
K N U C K L E D I S A S S E M B L Y
DISCONNECT STEERING KNUCKLE FROM SHOCK
ABSORBER
(a) Rsmove tha cotter pin and the nut.
(b) Using SST, disconnect the steering knuckle from
shock absorber.
s s T 0 9 6 2 8 - 6 2 0 1 1