Toyota Celica 1993 AT200 series Repair Manual page 503

s A - 1 4 8
SUSPENSION AND AXLE - REAR SUSPENSION
Rrl9347
R E A R S H O C K A B S O R B E R I N S T A L L A T I O N
1 . I N S T A L L S H O C K A B S O R B E R W I T H C O I L S P R I N G
Place the shock absorber and install the 3 uooer
suDoort n uts.
T o r q u e : 3 9 N . m ( 4 0 0 k g f . c m , 2 9 f t . l b f )
2, CONNECT SHOCK ABSORBER TO REAR AXLE CAR.
R I E R
Jack up the r6ar axle carrier and connect shock ab-
sorber with the 2 bolts and nuts.
Torque: 255 N.m (2,600 ksf.cm, 188 ft.lbf)
3. CONNECT STABILIZER BAR LINK TO SHOCK ABS-
ORBER
Connect the stabilizer bar link with the nut.
To.quo: 44 N.m (450 kgf 'cm, 33 ft lbf)
HINT: lf ths ball joint stud turns togethor with the nut,
use a hexagon wrench to hold the stud.
4.
INSTALL ABS SPEED SENSOR WIRE (w,z ABS) AND
B R A K E H O S E T O S H O C K A B S O R B E R
Torquc:
Brake hose: 19 N.m (t 92 kgf .cm, I tl ft'lbf)
A B S w i r e :
6 , 4 N ' m ( 5 6 k g f . c m , 4 8 i n . . l b f )
5. INSTALL REAR WHEEL AND LOWER VEHICLE
T o r q u e : 1 0 3 N . m ( 1 , 0 5 0 k g f . c m , 7 6 t t . l b f )