Toyota Celica 1993 AT200 series Repair Manual page 931

BO-50
B O D Y _ S L I D I N G R O O F
r t :
6 .
R E M O V E C A B L E G U I D E C A S I N G A S S E M B L Y
(a) Slide the drive cable forwards.
(b) Remove 12 screws.
(c) Apply adhesive tape to prot6ct the body.
(d) Pull the cable guide casing assembly forward to
remove.
S L I D I N G R O O F D I S A S S E M B L Y
1. REMOVE FOLLOWING PARTS:
(a) Slrding roof panel stopper
( b ) S u n s h a d e t r i m
(c) Cable guide casrng
2, REMOVE DRIVE CABLE
(a) Remove 2 screws and the cable guide block.
(b) Pull the drive cable from the guide rail.
s6