Toyota Celica 1993 AT200 series Repair Manual page 258

MX.67
E56 MANUAL TRANSAXLE _ DIFFERENTIAL CASE
HINT: Align tha matchmarks on the differential left
case and contact the ring gear.
( e ) T e m p o r a r i l y i n s t a l l l h o 1 6 b o l t s .
NOTICE: The ring gaar sat bolts should not be tightanod
until the ring gear has cool6d sufficiently.
(f)
After the ring gear has cooled sufficiently, torque the
ring gea r set bolts.
Torque: 124 N m (1,260 kgf.cm, 91 ft lbf)
4 .
I N S T A L L S I D E B E A R I N G
( a ) U s i n g S S T a n d a p r e s s , i n s t a l l a n e w R H s i d e b e a r i n g .
s s T 0 9 3 1 6 - 2 0 0 1 1
(b) Using SST and a press. install a new LH side bearing.
s s r 0 9 3 1 6 - 6 0 0 1 o ( 0 9 3 1 6 - o o o 1 o )
5. ADJUST OUTPUT SHAFT ASSEMBLY PRELOAD
(See pas e MX-70)
6.
INSTALL DIFFERENTIAL
CASE ASSEMBLY
lnstall tha differential case assemblv to tho transaxls
cas e.
7.
INSTALL OUTPUT SHAFT ASSMBLY
Lift up th6 differential case, install tho input shaft
a s s e m o t v .
t ,
n
-'l
l