Toyota Celica 1993 AT200 series Repair Manual page 390

S U S P E N S I O N
A N D A X L E - FRONT AXLE(MacPherson
Strut T
5.
INSTALL NEW DUST DEFLECTOR
Using SST and a hammer, install a new dust defloctor'
s s r 0 9 3 1 6 - 6 0 0 1 O ( 0 9 3 1 6 - 0 0 0 1 0 , 0 9 3 1 6 - 0 0 0 4 0 ) ,
0 9 6 0 8 - 3 2 0 1 0
H I N T : A l i g n t h s h o l e s f o r t h e A B S s p e s d s s n s o r i n t h o
dust deflector and steoring knuckle.
S T E E R I N G K N U C K L E W I T H A X L E H U B
INSTALLATlON
1 . I N S T A L L S T E E R I N G K N U C K L E
(a) Place tho steering knuckle and temporarily install tho
2 bolts and nuts on lower side of shock absorber,
HINT: Coat the thrsads of nuts with engine oil,
(b) Connect the lower arm to the lower ball joint and
tighten the bolt and 2 nuts,
Toiquo: 127 N.m (1,300 kgl cm' gtl ft lbf)
2,
CONNECT STABILIZER BAR LINK
Conn€ct the stabilizer bar link to the lowor susponsion
arm and tighten tho nut.
Torqus:44 N.m (450 kgf cm,33 tt'lbf)
3.
CONI{ECT TIE ROD END TO STEERING KNUCKLE
(a) Connect th€ tie rod 6nd to th€ steering knuckle and
tighten th€ nut.
Torquo: 49 N m (500 kgf cm, 36 ft'lbf)
( b ) I n s t a l l a n o w c o t t o r P i n .