Toyota Celica 1993 AT200 series Repair Manual page 893

BO-12
BODY _ FRONT DOOR
F R O N T D O O R A D J U S T M E N T
1 . A D J U S T D O O R I N F O R W A R D / R E A R W A R D
A N D
V E R T I C A L D I R E C T I O N S
Using SST, adjust ths door by loosening the body side
h i n g e b o l t s .
s s T 0 9 8 1 2 - 0 0 0 1 0
Torque: 28 N.m (290 kgf.cm,21 ft.lbf)
2. ADJUST DOOR IN LEFT,/RIGHT AND VERTICAL
D I R E C T I O N S
Using SST, adjust the door by loosening the door sid€
hinge bolts.
s s r 0 9 8 1 2 - 0 0 0 1 0
HINT: Substitute tho standard bolt for tho centering
bolt. (See page BO - 1 0)
Torque: 28 t{.m (290 kgf cm. 2l ft.lbf)
3. ADJUST DOOR LOCK STRIKER
(a) Check that the door fit and door lock linkages are
adjusted correctly.
(b) Loosen the striker mounting screws.
(c) Using a plastic hammer, tap th6 striker to adjusr it.
CAUTION: Do not tap the st?iker too hard.
Torque: 26 N.m (260 kgf .cm. 19 ft.lbf )
B O