Toyota Celica 1993 AT200 series Repair Manual page 1022

AC-67
AIB CONDITIONING
SYSTEM _ BLOWER MOTOR
BLOWER MOTOR
BLOWER MOTOR REMOVAL
1. DISCO]IIIIIECT NEGATIVE (_} TERMIITIAL CABLE
FROM BATTERY
GAUTION: Work mu.t bc .tlitcd after 90 tccondr from
the tlme the lgnition swltch l. turned to the'LOCK'
posltlon and thr ncgrtlv. (-) tcrmlnal cable is discon.
noctcd from tho batt.ry.
2.
REMOVE GLOVE BOX ASSEMBLY
(See page BO-52)
3.
REMOVE BLOWER MOTOR
(a) Disconnect tho connoctor from the blower motor.
(b) Remove the 3 screws and the blower motor.
BLOWER MOTOR INSPECTION
INSPECT BLOWER MOTOR OPERATION
Connect tho positivo (*) lead from the battery to
LHD Modsls
RHD Models
terminal 1 and the negativo (-) lead to terminal 2, ffi
then check that tho motor oD€ration is smooth.
BLOWER MOTOR INSTALLATION
1, INSTALL BLOWER MOTOR
(a) Install the blower motor with the 3 screws.
(b) Connect tho connector to the blowor motor.
2.
INSTALL GLOVE BOX ASSEMBLY
(See pase BO - 52)
3.
CONITECT NEGATIVE (-) CABLE FROM BATTERY