Toyota Celica 1993 AT200 series Repair Manual page 1025

AC-70
AIR CONDITIONING SYSTEM - AIR INLET CONTROL SERVOMOTOR
A I R I N L E T C O N T R O L S E R V O M O T O R
AIR INLET SERVOMOTOR REMOVAL
1, REMOVE GLOVE COMPARTMENT PARTS
(See page BO-52)
REMOVE SERVOMOTOR
Disconnct th€ conn€ctor.
Remove the 2 screws and the servomotor.
AIR INLET SERVOMOTOR INSPECTION
INSPECT SERVOMOTOR OPERATION
(a) Connect the positive (+) lead from the battery to
terminal 1 the nogative (-) lead to t€rminal 3, check
that th€ arm rotatos to the'FRESH'side smoothly.
(b) Connect the positive (*) lead from the battery to
terminal 1 and th6 negative (-) lead to terminal 2,
ch€ck that tho arm rotatas to the'RECIRC- side smo-
othly.
lf operation is not as specified, replace the sorvomo-
tor.
2.
( a )
( b )
AIR INLET SERVOMOTOR INSTALLATION
1. INSTALL SERVOMOTOR
(a) Install the servomotor with 2 screws.
(b) Connect the conn€ctor.
2. INSTALL GLOVE COMPARTMENT PARTS
(See page BO - 52)
l d 3 2 l l l l
,ffi\
f )
'lf
E_3
N l 0 l 4 2