sR-12
S T E E R I N G _ S T E E R I N G C O L U M N
Y
M a i n S h a f t
B u s h i n g
M a i n S h 8 f t
A s s e m b l y
(c) Using a brass bar and hammer, tap out the shaft
assembly with ths bushing.
NOTICE: Take cara not to drop tho shaft assembly.
Socure tho shaft assembly in a vise.
NOTICE: Do not tighten the vise too tight.
Using snap ring pliers, remove the snap ring.
( d )
(e)