Toyota Celica 1993 AT200 series Repair Manual page 727

RS-6
SUPPLEMENTAL RESTRAINT SYSTEM _ STEERING WHEEL PAD
(d) Using a torx socket wrench, removo 2 torx scrsws.
(e) Pull the steering wheel pad out from the ste€ring
w h e e l .
S T E E R I N G W H E E L P A D ] N S P E C T I O N
INSPECT EXTERIOR OF STEERING WHEEL PAD
CAUTION: Never disarsemblo tho stoering whaal pad.
Roplaca the steering wheel pad with a new one i{:
(a) The SRS has deployed.
(b) The pad surface, airbag sensor or inflator has dents,
cracks or deform ation.
(c) The SRS has been dropped.
S T E E R I N G W H E E L I N S P E C T I O N
INSPECT EXTERIOR OF STEERING WHEEL
Replace tho rto€ring wheel with a new one if:
(a) The st€oring wheel metal bracket is deformed.
(b) The new steoring wheel pad cannot b€ installed with-
out forc ing it.
iid'"