Toyota Celica 1993 AT200 series Repair Manual page 660

sR-41
STEERING - POWER STEERING
3.
TURN STEERING
W H I L E D R A I N I N G
WHEEL FROM LOCK TO LOCK
F L U I D
4. FILL OIL RESERVOIR
WITH FRESH FLUID
Fluid:
A T F D E X R O N O I I
5.
START ENGINE AND RUN IT AT l,OOO RPM
After 1 or 2 seconds, fluid will begin to discharge from
th€ r6turn hose. Stop the engina immediately at this
time.
NOTICE: Take care that romo fluid remainr left In tho oil
retervoir.
6.
REPEAT STEPS 4 AND 5 FOUR OR FIVE TIMES
UNTIL THERE IS NO MORE AIR IN FLUID
7.
CONNECT RETURIII HOSE TO OIL RESERVOIR
8.
BLEED POWER STEERING SYSTEM
POWER STEERING SYSTEM BLEEDING
I,
CHECK FLUID LEVEL IN OIL RESERVOIR
Check the fluid level and add fluid if necessary.
Fluid:
ATF DEXROI{O tr
H I N T : 7 A - F E
Check that th6 fluid level is within the HOT LEVEL of
the dipstick of the reservoir cap. lf th€ fluid is cold,
check that it is within the COLD LEVEL of the dip-
stick.
H I N T : 3 5 - G E , 3 5 - F E , 5 S - F E
Check thar tho fluid level is within tho HOT LEVEL of
ths reservoir. lf the fuild is cold, check that it is within
th6 COLD LEVEL of the reservoir.
\ / A - T E / l . t D _ ( , E , , r D ' T t r , C J _ r E /
R 1 0 1 0 7