Toyota Celica 1993 AT200 series Repair Manual page 61

MX-20
c52 MANUAL TRANSAxLE - ASSEMBLy REM''AL AND TNSTALLATT.N
MX
1 2 . I N S T A L L U N D E R C O V E R S
13. INSTALL FRONT WHEELS AND LOWER VEHICLE
14. REMOVE ENGINE SUPPORT FIXTURE
15. INSTALL AND TOROUE STARTER'S SET BOLT
lnstall and torouB the starter's set bolt to the transaxle
upper side.
Torque:39 N.m (400 kgf.cm,29 ft.lbf)
1 6 . C O N N E C T S P E E D S E N S O R C O N N E C T O R
1 7 . C O N N E C T C O N T R O L C A B L E S
(a) Connect the 2 control cables to the control lover
h o u s i n g .
(b) Install the 2 clips to the cables.
(c) Install the 2 clips and washsrs.
1 8 , I N S T A L L E N G I N E W I R E S C L A M P
Install and torqu6 tha engine wires clamp's set bolt to
tho tra nsaxls.