Toyota Celica 1993 AT200 series Repair Manual page 664

STEERING _ POWER STEERING
(b) Using SST, connect ths tube to the control valve
h o u s i n g .
ssT 09631 -22020
Torque: 36 N.m (365 kgf .cm, 26 ft lbf )
HINT: Use a torque wrench with a fulcrum length of
3 0 0 m m ( 1 1 . 8 1 i n . ) .
(c) Bl6sd the powor steering syst€m.
( S e e p a g e S R - 4 1 )
M E A S U R E S T E E R I N G E F F O R T
1 . C E N T E R S T E E R I N G W H E E L A N D R U N E N G I N E A T
I D L E
2 .
M E A S U R E S T E E R I N G E F F O R T
(a) Remove the steering wheel pad.
(See page SR - 8)
(b) Measure the steoring effort in both directions'
Maximum stearing effort:
6.9 N.m (70 ksf.cm.61 in..lbf)
lf steering effort is excessive, ropair the power steer-
I n g u n r t .
H I N T : 8 e s u r e t o c o n s i d e r t h e t i r o t y p e , p r e s s u r s a n d
contact surfacs before making your diagnosis.
(c) Torque the stssring wheel set nut.
Torque: 34 N.m (350 kgf.cm, 25 ft lbf)
(d) Install the stosring wheel pad.
(See page SR - 9)