Toyota Celica 1993 AT200 series Repair Manual page 506

s A - 1 5 1
S U S P E N S I O N
A N D A X L E - R E A R S U S P E N S I O N
(d) Lower the suspension member to pull out the lowor
susoension arm set bolt.
(e) Rsmove the No.1 lower suspension arm with the 2
bolts and the washer.
NO.2 LOWER SUSPENSION ARM
DISASSEMBLY
DISASSEMBLE NO.2 LOWER SUSPENSION ARM
(a) Looson the 2 lock nuts.
(b) Turn the adjusting tube and disassemble the No.2
lower suspension arm.
(c) Remove ths lock nuts from the arms.
NO.2 LOWER SUSPENSION ARM
ASSEMBLY
ASSEMBLE NO.2 LOWER SUSPENSION ARM
(a) Install th€ lock nuts to th€ arms.
(b) Turn the adjusting tube and assemble the No.2 lower
susoension arm.
HINT: When asssmbling the No.2 lower suspension
arm, try to make dimensions A and B shown in the
illustration as close as possible.
Marimum differenc.:
3 mm (0.12 in.)