sA-48
suspENsroN AND AxLE - FRoNT DRrvE sHAFT(3s-GE)
S A
1 4 . R E M O V E B E A R I N G
(a) Using a snap ring expander, remove tho snap ring.
(b) Using a pr6ss. press out the b€aring.
(c) Remove the snap ring.
15. w/o LSD:
REMOVE STRAIGHT PIN
Using a pin punch and a hammer, tap out straight pin.
FRONT DRIVE SHAFT ASSEMBLY
1. w/o LSD:
INSTALL STRAIGHT PIN
(a) Install the straight pin into the bearing case.
(b) Using SST and a press, prsss tho new bearing into the
bearing case.
s s T 0 9 6 0 8 - 1 2 0 1 0 ( 0 9 6 0 8 - 0 0 0 2 0 , 0 9 6 0 8 - 0 0 0 6 0 )