Toyota Celica 1993 AT200 series Repair Manual page 682

sR-63
STEERING - POWER STEERING
S c r e w d r i v e r
8.
REMOVE REAR HOUSING AND WAVE WASHER
(a) Using 2 screwdrivers, remove the snap ring.
(b) Using a plastic hammer, tap out the housing and
wasner.
(c) Remove the O-ring from the housing.
9.
REMOVE SIDE REAR PLATE
(a) Using a plastic hammsr, tap out the plate.
(b) Remove the O-ring from tha plate.
1 0 . R E M O V E C A M R I N G A N D 1 O V A N E P L A T E S
Remove the ring and plates from the shaft.
1 1 . R E M O V E V A N E P U M P S H A F T W I T H V A N E P U M P
ROTOR AND SIDE FRONT PLATE
Remove the longer straight pin from the front hous-
i n g .
1 2 , R E M O V E V A N E P U M P R O T O R A N D S I D E F R O N T
PLATE
(a) Using a screwdriver, remove the snap ring.
(b) Remove the 2 O-rings from the plate.
? m f f i
f f i # g y *