Toyota Celica 1993 AT200 series Repair Manual page 783

BE-50
BoDy ELEcTRTcAL sysrEM - wrpER AND *ASHER sysrEM
N 1 1 2 4 3
N 1 1 2 4 4
N 1 0 0 1 8
N 1 1 2 3 0
3.
INSPECT INTERMITTENT OPERATION
(a) Turn the wiper switch to INT position.
(b) Turn the intsrmittent time control switch to FAST
p o s i t i o n .
(c) Connect the positive (+) lead from the battery to
t e r m i n a l l 6 ( 1 2 ) a n d t h e n e g a t i v o ( - ) l e a d t o t e r m i n a l
2(8).
(d) Connect the positive (*) lead from tho voltmeter to
t e r m i n a l 7 ( 3 ) a n d t h e n e g a t i v e ( - ) l e a d t o t e r m i n a l 2
(8), check that the meter needle indicat6s battery
vo lta g e.
( ): RHD Models
INT time control
switch position
Voltags
FAST
,
, A p p r o x . 1 - 3 s e c .
L]----
Bafterv vortase
S L O W
A D p r o x . ' 1 0 - 1 5 s e c .
t]ff
Banelyvortase
. B u
lf operation is not as specified, replace the wiper and
washer switch.
4 . I N S P E C T R E A R W I P E R A N D W A S H E R S W I T C H
C O N T I N U I T Y
LHD Models:
Inspect the switch continuity between tsrminals.
lf continurty is not as specified, replacs ths switch.
Switch position
T€st6r conn6ction to
tsrminal numbor
Spocifi6d value
W i p s r O F F
No continuity
Wiper INT Continuity
W i p o r O N
2 - 1 0
Continuity
washer ON
Continuity