Toyota Celica 1993 AT200 series Repair Manual page 460

s A - 1 0 5
SUSPENSION AND AXLE - FRONT SUSPENSION
Strut T
(g) Install the contor member.
Torque:
A: 35 t{.m (360 kgf 'cm, 26 {t'lbf)
B: 39 N.m (400 kgf 'cm, 29 ft'lbf)
3.
TEMPORARILY INSTALL 3 BOLTS
4.
INSTALL STABILIZER BAR LINK
(a) Install the both stabilizer bar bushing retainers
bolts.
Torque: 1 I N.m (1 95 kgt'cm. 14 ft'lbf)
(b) Connect the stabilizer bar link and tigh€n the nut'
Torque: 44 N.m (450 kgf 'cm, 33 tt'lbf)
HINT: lf the balljoint stud turns tog€ther with the nut,
use a hexagon wrench to hold the stud.
5.
CONNECT CAMBER CONTROL ARM
(a) Connect the camber control arm to the shock ab-
sorber and tighen the nut.
Torque: 172 N'm (1'780 kgf 'cm, I 27 tt'lbf)
(b) Install the lock cap and a n€w cotter pin'
:.r=-
.
rsA