Toyota Celica 1993 AT200 series Repair Manual page 574

BRAKE SYSTEM - REAR BRAKE(Disc Brake
5.
INSTALL SLIDING BUSHING AND DUST BOOTS
Install 2 nsw boots and the sliding bushing.
C A L I P E R I N S T A L L A T I O N
1 .
I N S T A L L M A I N P I N
Install the main pin and torque the main pin installa-
tion bolt.
Torque: 27 N.m (270 kgf 'cm, 19 ft'lbf)
t'di
INSTALL 2 PADS
Install pads with the pad wear i n d i c a t o r p l a t e f a c i n g
downward.
NOTICE: There should be no oil or groase adhering to the
triction surtaces of ihe pads or the disc'
INSTALL CALIPER
Install th€ caliper and torqu€ the rnstallation bolt.
T o r q u e : 2 0 N . m ( 2 0 0 k g f . c m , 1 4 f t ' l b f )
C O N N E C T F L E X I B L E H O S E
Install th€ flexible hose on the calipor with 2 new
gaskets.
Torque: 30 N.m (310 kgf 'cm, 22 ft lbf )
HINT: Insert the flexibl6 hose lock securely in ths lock
hole in the ca liper.
F I L L B R A K E R E S E R V O I R W I T H B R A K E F L U I D A N D
BLEED BRAKE SYSTEM (See Page BR-9)
C H E C K F O R L E A K S
4.
6 .