Ip Bgp Confederation Identifier - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

ip bgp confederation identifier

Sets a confederation identification value for the local BGP speaker (this router). A confederation is a
grouping of sub-ASs into a single AS. To peers outside a confederation, the confederation appears to be a
single AS. Within the confederation multiple ASs may exist and even exchange information with each
other as using external BGP (EBGP).
ip bgp confederation identifier value
Syntax Definitions
value
Defaults
parameter
value
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
•
Use the no form of this command to restore the default value.
•
A value of 0 means this local speaker is not a member of any confederation.
•
The BGP protocol must be disabled (using the
•
Use this command in conjunction with the
peers that are a members of the same confederation as the local BGP speaker.
Examples
-> ip bgp confederation identifier 3
Release History
Release 6.1; command was introduced.
Related Commands
ip bgp autonomous-system
ip bgp confederation neighbor
MIB Objects
alaBgpGlobal
alaBgpConfedId
page 25-24
The confederation identification value. The valid range is 0–65535.
default
0
ip bgp status
ip bgp confederation neighbor
Sets the AS number for this router.
Specifies peers that are members of a confederation.
command) before using this command.
command to specify those
OmniSwitch CLI Reference Guide
BGP Commands
June 2012