Table of Contents
Advertisement
Next steps
1
Install heat sinks and processors.
2
Install memory modules.
3
Install the expansion riser to slot 5.
4
Install the OCP card.
5
Install the mezzanine card.
6
Install the PCIe card.
7
Complete the procedure listed in After working inside your system.
Trusted platform module
Trusted Platform Module (TPM) is a dedicated microprocessor designed to secure hardware by integrating cryptographic keys into devices.
Software can use a Trusted Platform Module to authenticate hardware devices. Because each TPM chip has a unique and secret RSA key
which is embedded during the manufacture of the TPM, and it is capable of performing platform authentication operation.
CAUTION:
Do not attempt to remove the Trusted Platform Module (TPM) from the server board. After the TPM is installed, it is
cryptographically bound to that specific server board. Any attempt to remove an installed TPM breaks the cryptographic binding,
and it cannot be re-installed or installed on another server board.
Installing trusted platform module
Prerequisites
CAUTION:
Do not attempt to remove the Trusted Platform Module (TPM) from the server board. Once the TPM is installed, it is
cryptographically bound to that specific server board. Any attempt to remove an installed TPM breaks the cryptographic binding,
and it cannot be re-installed or installed on another server board.
NOTE:
This is a Field Replaceable Unit (FRU). Removal and installation procedures should be performed only by Dell certified
service technicians.
1
Follow the safety guidelines listed in the Safety instructions section.
2
Complete the procedure listed in Before working inside your system.
3
Remove the PCIe card.
Steps
1
Align the trust platform module into the server board connector and insert it.
NOTE:
To locate the TPM connector on the server board, see the server board connectors section.
84
Installation and Service Manual
Installing and removing server components
Advertisement
Table of Contents
