Ca-Type - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

ca-type

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
2884
®
OS for EX Series Ethernet Switches, Release 10.4
ca-type {
number {
ca-value value;
}
}
[edit protocols lldp-med interface (all | interface-name location civic-based)]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
For Link Layer Discovery Protocol–Media Endpoint Device (LLDP-MED), configure the
address elements. These elements are included in the location information to be
advertised from the switch to the MED. This information is used during emergency calls
to identify the location of the MED.
For further information about the values that can be used to comprise the location,, refer
to RFC 4776, Dynamic Host Configuration Protocol (DHCPv4 and DHCPv6) Option for Civic
Addresses Configuration Information. A subset of those values is provided below.
The statement is explained separately.
ca-value
Disabled.
—Civic address elements that represent the civic or postal address. Values are:
value
—A code that specifies the language used to describe the location.
0
—The leading-street direction, such as "N".
16
—A trailing street suffix, such as "SW".
17
—A street suffix or type, such as "Ave" or "Platz".
18
—A house number, such as "6450".
19
—A house-number suffix, such as "A" or "1/2".
20
21 —A landmark, such as "Stanford University".
—Additional location information, such as "South Wing".
22
23 —The name and occupant of a location, such as "Carrillo's Holiday Market".
—A house-number suffix, such as "95684".
24
25 —A building structure, such as "East Library".
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
show lldp on page 2990
Copyright © 2010, Juniper Networks, Inc.