Edit Protocols] Configuration Statement Hierarchy - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

[edit protocols] Configuration Statement Hierarchy

2860
®
OS for EX Series Ethernet Switches, Release 10.4
Understanding BPDU Protection for STP, RSTP, and MSTP on EX Series Switches on
page 1756
Understanding Redundant Trunk Links on EX Series Switches on page 1512
Understanding Storm Control on EX Series Switches on page 3013
Understanding 802.1X and VoIP on EX Series Switches on page 2761
Understanding Q-in-Q Tunneling on EX Series Switches on page 1514
Understanding Unknown Unicast Forwarding on EX Series Switches on page 3014
Understanding MAC Notification on EX Series Switches on page 1523
Understanding FIP Snooping on page 3579
protocols {
connections {
remote-interface-switch connection-name {
interface interface-name.unit-number;
transmit-lsp label-switched-path;
receive-lsp label-switched-path;
}
}
dot1x {
authenticator {
authentication-profile-name profile-name;
interface (all | [ interface-names ]) {
disable;
guest-vlan ( vlan-id | vlan-name);
mac-radius <restrict>;
maximum-requests number;
no-reauthentication;
quiet-period seconds;
reauthentication {
interval seconds;
}
retries number;
server-fail (deny | permit | use-cache | vlan-id | vlan-name);
server-reject-vlan (vlan-id | vlan-name);
server-timeout seconds;
supplicant (multiple | single | single-secure);
supplicant-timeout seconds;
transmit-period seconds;
}
static mac-address {
interface interface-name;
vlan-assignment (vlan-id |vlan-name);
}
}
gvrp {
<enable | disable>;
interface (all | [interface-name]) {
Copyright © 2010, Juniper Networks, Inc.