Novell NETWARE 6-DOCUMENTATION Manual page 2579

Syntax
Using PROTECTION
PROTOCOL
Purpose
Syntax
PROTECTION [RESTART | NO RESTART address_space]
Parameter
no parameter)
RESTART address_space
NO RESTART
address_space
When you execute PROTECTION without parameters, the server displays a
list of all loaded address spaces. Each address space name is followed by a list
of the modules loaded into the space, with a short description of each module.
If you add restart functionality to an address space, use the Memory Protection
No Restart Interval parameter to prevent the address space from repeatedly
faulting and then restarting. See
Use at the server console to
View the protocols registered on your NetWare
Register additional protocols and frame types
PROTOCOL [REGISTER protocol frame id#]
Parameter
(no parameter)
Use to
Display a list of address spaces and the
modules loaded into them.
Add restart functionality to the designated
address space.
Remove restart functionality from the
designated address space.
"Memory Parameters" on page
®
Use to
Display the protocols registered on your
server.
207.
server
Utilities 141